Tutorials and How-tos/Install a No-IP Client

If you find Excito's Easyfind service or DynDNS (see Tutorials and How-tos/Install a DynDNS Client) not being enough for you, you might want to use No-IP http://www.no-ip.com.

To use No-IP, you have to first create an account at: http://www.no-ip.com/getting_started.php and the following guide allows you to enable your Bubba to tell No-IP when its IP address changes.

1. Access your bubba via SSH (see Howto/Access Server via SSH for information how to accomplish this)
   Change to the user root:

   '''su'''

   (By default: When asked for password, type excito and press enter)

2. Install the application:

   '''apt-get install no-ip

'''

1. Configure the client using the responses you setup when configuring your No-IP account: 
   - Your account Name: (Example: bubba@excito.com)
   - Your password
   - The right interface to choose from the list is 'eth0'

   '''/usr/bin/no-ip -C '''

Auto configuration for Linux client of no-ip.com. Multiple network devices have been detected.

Please select the Internet interface from this list. By typing the number associated with it. 0 eth0 1 br0

Please enter the login/email string for no-ip.com : '''bubba@excito.com'''

Please enter the password for user 'bubba@excito.com' '''******'''

1. Check you have configured the software correctly:
   

   /usr/bin/no-ip -S

1 no-ip process active. Process 2922, started as no-ip Using configuration from /etc/no-ip.conf Last IP Address set 0.0.0.0 Account bubba@excito.com configured for: host bubba.zapto.org Updating every 30 minutes via /dev/eth1 with NAT enabled.

1. Restart the client program:

   '''/etc/init.d/no-ip restart'''

Thats all!