Difference between revisions of "Running Arch Linux"

From BubbaWiki
Jump to navigation Jump to search
m (→‎Prerequisites: Update links to mybubba.org)
m (→‎Setting up the root device: Update links to mybubba.org)
Line 16: Line 16:
I'm going to assume that you are using a HDD.
I'm going to assume that you are using a HDD.


Now - Boot up your [http://wiki.excito.org/wiki/index.php/Rescue_System rescue system].
Now - Boot up your [[Rescue System]].


Once booted download the latest Arch tarball
Once booted download the latest Arch tarball

Revision as of 15:20, 10 October 2014

Introduction

This guide will help you to get your B3 up and running with the latest release of Arch Linux.

Prerequisites

The Arch part

Setting up the root device

There are several ways of doing this, depending on whether you are using a USB device or HDD as root device.
I'm going to assume that you are using a HDD.

Now - Boot up your Rescue System.

Once booted download the latest Arch tarball

 wget http://archlinuxarm.org/os/ArchLinuxARM-kirkwood-latest.tar.gz

Write a partitiontable on the device you want to use as root device

 cfdisk /dev/sd? # new -> primary

And format it as EXT4

 mkfs.ext4 /dev/sd?1

Now mount it and unpack the good stuff

 mount /dev/sd?1 /mnt
 tar xvf ArchLinuxARM-kirkwood-latest.tar.gz -C /mnt
 umount /mnt

If everything goes well you should have a bootable Arch system. (login root/root)

 [root@alarm ~]# uname -a
 Linux alarm 3.16.1-1-ARCH #1 PREEMPT Fri Aug 15 20:35:00 MDT 2014 armv5tel GNU/Linux

Last but not least, ReedWood has made a repository with B3 specific things for Arch, that you might want to take a look at.