Difference between revisions of "How-to-set-up-multifactor-authentication"

From BubbaWiki
Jump to navigation Jump to search
 
Line 1: Line 1:
How to set up multifactor authentication<br>  
How to set up multifactor authentication<br>Author: Eek<br><br>This tutorial is about setting up high security multifactor authentication using a series of single-use "passcodes".<br>As many of us like the bubba for it's power and versatility, we also want to be able to connect to it from outside our home-network. SSH/Putty gives us the opportunity to open up our entire home-network from a remote location. This of course adds to the security risk. Which is why I created this how to, to let you all know of a way to implement a High security multifactor authentication.<br>One tip: do not open port 22 in your router for ssh (as hackers are scanning for known port numbers), but choose a random port number.<br>The information about the High security multifactor authentication using a series of single-use "passcodes" can be found at: https://www.grc.com/ppp.htm<br>Or listen to the podcasts on the subject at http://www.grc.com/securitynow.htm<br>This how to describes installation of the PAM module by Thomas Fors (http://code.google.com/p/ppp-pam/)<br>Note: Installed and tested on Etch, Sarge should also work.<br><br>Packages<br>Install the packages, using the Debian sources, see Howto install Debian packages [5].  
 
Author: Eek<br>  
 
<br>This tutorial is about setting up high security multifactor authentication using a series of single-use "passcodes".<br>As many of us like the bubba for it's power and versatility, we also want to be able to connect to it from outside our home-network. SSH/Putty gives us the opportunity to open up our entire home-network from a remote location. This of course adds to the security risk. Which is why I created this how to, to let you all know of a way to implement a High security multifactor authentication.<br>One tip: do not open port 22 in your router for ssh (as hackers are scanning for known port numbers), but choose a random port number.<br>The information about the High security multifactor authentication using a series of single-use "passcodes" can be found at: https://www.grc.com/ppp.htm<br>Or listen to the podcasts on the subject at http://www.grc.com/securitynow.htm<br>This how to describes installation of the PAM module by Thomas Fors (http://code.google.com/p/ppp-pam/)  
 
Note: Installed and tested on Etch, Sarge should also work.<br><br>Packages<br>Install the packages, using the Debian sources, see Howto install Debian packages [5].  
<pre>apt-get install subversion make gcc g++ uuid-dev libpam0g-dev
<pre>apt-get install subversion make gcc g++ uuid-dev libpam0g-dev
apt-get install wget</pre>  
apt-get install wget</pre>  

Latest revision as of 12:14, 7 October 2010

How to set up multifactor authentication
Author: Eek

This tutorial is about setting up high security multifactor authentication using a series of single-use "passcodes".
As many of us like the bubba for it's power and versatility, we also want to be able to connect to it from outside our home-network. SSH/Putty gives us the opportunity to open up our entire home-network from a remote location. This of course adds to the security risk. Which is why I created this how to, to let you all know of a way to implement a High security multifactor authentication.
One tip: do not open port 22 in your router for ssh (as hackers are scanning for known port numbers), but choose a random port number.
The information about the High security multifactor authentication using a series of single-use "passcodes" can be found at: https://www.grc.com/ppp.htm
Or listen to the podcasts on the subject at http://www.grc.com/securitynow.htm
This how to describes installation of the PAM module by Thomas Fors (http://code.google.com/p/ppp-pam/)
Note: Installed and tested on Etch, Sarge should also work.

Packages
Install the packages, using the Debian sources, see Howto install Debian packages [5]. 

apt-get install subversion make gcc g++ uuid-dev libpam0g-dev
apt-get install wget

Installation

$ cd /tmp
$ wget http://ppp-pam.googlecode.com/files/ppp-pam-0.2.tar.gz
$ tar -xvzf ppp-pam-0.2.tar.gz
$ cd ppp-pam/build
$ ../configure
$ make

Test to confirm it builds correctly 

make test

Install the pppauth utility and PAM module in the appropriate folders. 

make install

Configuration
Enable PPP authentication for ssh connections. 

vi /etc/pam.d/ssh

Enter the following line just below: @include common-auth 

auth required pam_ppp.so

Make sure you have the following settings in sshd_config 

vi /etc/ssh/sshd_config

ChallengeResponseAuthentication yes
UsePAM yes

Usage
Create a PPP sequence key for your user account you use to login. This will probably not be root! 

pppauth --key

Generate a passcard. Print or save it 

pppauth --text --next 1

Try logging in to test it. 

ssh localhost

References
1. https://www.grc.com/ppp.htm
2. http://www.grc.com/ppp/software.htm
3. http://code.google.com/p/ppp-pam/
4. http://code.google.com/p/ppp-pam/wiki/Building
5. http://forum.excito.net/viewtopic.php?t=421

Retrieved from "https://wiki.excito.com/index.php?title=How-to-set-up-multifactor-authentication&oldid=452"