Running Arch Linux

From BubbaWiki
Revision as of 07:59, 17 August 2014 by Niels Kristensen (talk | contribs) (Created page with '= Introduction = This guide will help you to get your B3 up and running with the latest release of Arch Linux. = Prerequisites = *A [http://wiki.excito.org/wiki/index.php/Ser...')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Introduction

This guide will help you to get your B3 up and running with the latest release of Arch Linux.

Prerequisites

The Arch part

Setting up the root device

There are several ways of doing this, depending on whether you are using a USB device or HDD as root device.
I'm going to assume that you are using a HDD.

Now - Boot up your rescue system.

Once booted download the latest Arch tarball

 wget http://archlinuxarm.org/os/ArchLinuxARM-kirkwood-latest.tar.gz

Write a partitiontable on the device you want to use as root device

 cfdisk /dev/sd? # new -> primary

And format it as EXT4

 mkfs.ext4 /dev/sd?1

Now mount it and unpack the good stuff

 mount /dev/sd?1 /mnt
 tar xvf ArchLinuxARM-kirkwood-latest.tar.gz -C /mnt
 umount /mnt

If everything goes well you should have a bootable Arch system. (login root/root)

 [root@alarm ~]# uname -a
 Linux alarm 3.16.1-1-ARCH #1 PREEMPT Fri Aug 15 20:35:00 MDT 2014 armv5tel GNU/Linux