Let your B3 beep and change the LED color

From BubbaWiki
Revision as of 21:08, 18 November 2010 by Dmitri Popov (talk | contribs) (fixed enable/disable LED commands)
Jump to navigation Jump to search

If you need to attract attention, you can let B3 make some noise!

Log in as administrator and become root.

Buzzer

To beep type the command:

echo 1 > /sys/bus/platform/devices/bubbatwo/buzzer

To turn of the beep, type:

echo 0 > /sys/bus/platform/devices/bubbatwo/buzzer

LED

Use the following commands to change the front LED color..

Blue:

echo 0 > /sys/bus/platform/devices/bubbatwo/color

Red:

echo 1 > /sys/bus/platform/devices/bubbatwo/color

Green:

echo 2 > /sys/bus/platform/devices/bubbatwo/color

Purple:

echo 4 > /sys/bus/platform/devices/bubbatwo/color
To disable the LED: 
<pre>echo off > /sys/bus/platform/devices/bubbatwo/ledmode

To enable the LED:

echo lit > /sys/bus/platform/devices/bubbatwo/ledmode