Difference between revisions of "Let your B3 beep and change the LED color"
Jump to navigation
Jump to search
Line 30: | Line 30: | ||
</pre> | </pre> | ||
To enable the LED: | To enable the LED: | ||
<pre>echo off > /sys/bus/platform/devices/bubbatwo/ledmode</pre | <pre>echo off > /sys/bus/platform/devices/bubbatwo/ledmode</pre> | ||
Revision as of 09:17, 17 November 2010
If you need to attract attention, you can let B3 make some noise!
Log in as administrator and become root.
To beep type the command:
echo 1 > /sys/bus/platform/devices/bubbatwo/buzzer
To turn of the beep, type:
echo 0 > /sys/bus/platform/devices/bubbatwo/buzzer
Use the following commands to change the front LED color..
Blue:
echo 0 > /sys/bus/platform/devices/bubbatwo/color
Red:
echo 1 > /sys/bus/platform/devices/bubbatwo/color
Green:
echo 2 > /sys/bus/platform/devices/bubbatwo/color
Purple:
echo 4 > /sys/bus/platform/devices/bubbatwo/color
To disable the LED:
echo lit > /sys/bus/platform/devices/bubbatwo/ledmode
To enable the LED:
echo off > /sys/bus/platform/devices/bubbatwo/ledmode