HomeAutomation and Tellstick

From BubbaWiki
Revision as of 12:23, 29 August 2011 by Magnus (talk | contribs)
Jump to navigation Jump to search

This guide will help you to install the fantastic software HomeAutomation and the very neat piece of hardware Telldus Tellstick on a B3.

The information here is collected from various threads on http://forum.excito.net/, thank you DanielM and Moloko!


More about HomeAutomation is found here: karpero.mine.nu/ha/

More about Tellstick is found here: www.telldus.se/

Install Tellstick

Conditions

  • Tellstick not connected to B3
  • Logged in as root on B3


1. Install package for compiling on B3

apt-get install cmake
apt-get install build-essential


2. Install package needed by Telldus

apt-get install libconfuse-dev libqt4-dev help2man


3. Download the latest software for Tellstick and extract. Use the latest tellstick core found at: http://download.telldus.se/TellStick/Software/telldus-core/.

wget http://download.telldus.se/TellStick/Software/telldus-core/telldus-core-2.0.4.tar.gz
tar xvfz telldus-core-2.0.4.tar.gz
cd telldus-core


4. Build tdtool and rfcmd.

cmake -DBUILD_LIBTELLDUS-CORE=1 -DBUILD_TDTOOL=1 -DBUILD_RFCMD_WITH_LIBFTDI=0 -DGENERATE_MAN=1
make
make install


5. Edit the file /etc/ld.so.conf.d/local.conf (if not existing, add the file):

nano /etc/ld.so.conf.d/local.conf

Add the following line:

/usr/local/lib 


6. Then run:

ldconfig
rm -f /var/state/telldus-core.conf


7. Insert the Tellstick into B3

8. To add receiver units, edit the file /etc/tellstick.conf

nano /etc/tellstick.conf

Adjust the config file to your receiver units. In this case: 1pcs NEXA NEYCR-1000 and 1pcs NEXA LWMR-210.

deviceNode = "/dev/tellstick"
device {
id = 1
name = "Office"
protocol = "arctech"
model = "selflearning-switch"
parameters {
house = "112233"
unit = "1"
}
}

device {
id = 2
name = "Outside"
protocol = "arctech"
model = "selflearning-dimmer"
parameters {
house = "445566"
unit = "1"
}
} 

Some notes for tellstick.conf.

  • Change the values after the "house" parameter to a randomly chosen number. The uniqe numbers will make sure your units do not interfere with other units. Read about the Tellstick config file here: developer.telldus.se/wiki/TellStick_conf.
  • If using 'model = "codeswitch" ' the 'house' parameter should be a letter.
  • If you want to add more receiver units add more units to this configuration file.

9. Add an udev rule for the tellstick. Create the file:

nano /etc/udev/rules.d/99-tellstick.rules

Add the content:

KERNEL=="ttyUSB*", BUS=="usb", SYSFS{idVendor}=="1781", SYSFS{idProduct}=="0c30", NAME="tellstick", GROUP="plugdev"


Install HomeAutomation


1. First of all install AT for scheduling on B3.

apt-get install at

2. Remove the user www-data from the files: /etc/cron.deny, /etc/at.deny, /etc/cron.allow and /etc/at.allow files (if they exist).

nano /etc/at.deny

3. Download the latest version of the HomeAutomation software to your PC, karpero.mine.nu/ha/index.php

4. Unzip and place the files into /home/web/HA on your B3.

5. Edit the configuration file /home/web/HA/config_sample_linux.php. Change the search path in the configuration file to:

/home/web/HA 

6. Rename the configuration file config_sample_linux.php to config.php.

7. HomeAutomation needs the timezone to be set in Appache2. Edit the file php.ini:

nano /etc/php5/apache2/php.ini

Change the "date.timezone" to match your location (in example Europe/Stockholm).

”date.timezone = Europe/Stockholm”

8. Restart Apache:

apachectl restart

9. Change the ownership and priviliges for the folder /home/web/HA:

chmod -R 755 /home/web/HA/
chown -R www-data:www-data /home/web/HA/

10. Install myPhPAdmin on B3.

apt-get install phpMyAdmin

11. Add a database for HomeAutomation.

mysqladmin create HADatabase

12. Open a web browser to configure HomeAutomation. Browse to http://b3/HA/ and follow the instructions.

Regarding the database information, use the following information:

Database name:"HADatabase" 

Usr: root

Psw: ”” (empty)

Connecting your receiver units

1. Connect your receiver unit/units into a wall outlet.

2. Connect a lamp in the receiver unit.

3. Turn the lamp power switch on (lamp will not lit).

Configuring your receiver units in HomeAutomation

1. Open a web browser. Browse to http://b3/HA

2. Import your receiver units from the earlier edited tellstick config file (repeat this step every time you have edited the file: /etc/tellstick.conf).

2.1 Click the menu "Konfiguration" - "Enheter".

2.2 Click the text "Uppdatera från Tellstick".

3. Sync your NEXA units from the web UI:

3.1. In the UI, click the menu "Enheter".

3.2. Press the learn-button on one NEXA unit.

3.3. Click the lamp on in the web UI.

3.4. Make sure that the unit gets synched, the connected lamp will blink.


Now should everything be in place for starting to play with the settings and scheduling in HomeAutomation!

Good luck :)