Difference between revisions of "HomeAutomation and Tellstick"

From BubbaWiki
Jump to navigation Jump to search
Line 1: Line 1:
This guide will help you to install the fantastic software HomeAutomation and the very neat piece of hardware Telldus Tellstick on a B3. The information here is collected from various threads on http://forum.excito.net/.<br>  
This guide will help you to install the fantastic software HomeAutomation and the very neat piece of hardware Telldus Tellstick on a B3. The information here is collected from various threads on http://forum.excito.net/.<br>  


<br>  
More about HomeAutomation is found here: [http://karpero.mine.nu/ha/ karpero.mine.nu/ha/]
 
More about Tellstick is found here: [http://www.telldus.se/ www.telldus.se/]<br>  


= Install Tellstick  =
= Install Tellstick  =
Line 64: Line 66:
Change the parameter "house" to a randomly choosen number. The uniqe numbers will make sure your units do not interfear with other units.<br>  
Change the parameter "house" to a randomly choosen number. The uniqe numbers will make sure your units do not interfear with other units.<br>  


== Installera HomeAutomation<br>  ==
== Install HomeAutomation<br>  ==


<br>1. Installera AT för schemaläggning:  
<br>1. Installera AT för schemaläggning:  

Revision as of 10:15, 29 August 2011

This guide will help you to install the fantastic software HomeAutomation and the very neat piece of hardware Telldus Tellstick on a B3. The information here is collected from various threads on http://forum.excito.net/.

More about HomeAutomation is found here: karpero.mine.nu/ha/

More about Tellstick is found here: www.telldus.se/

Install Tellstick

Conditions

  • Tellstick not connected to B3
  • Logged in as root on B3


1. Install packet for compiling on B3

apt-get install cmake
apt-get install build-essential


2. Install packet needed by Telldus

apt-get install libconfuse-dev libqt4-dev help2man


3. Download the latest software for Tellstick and extract. Use the latest tellstick core found at: http://download.telldus.se/TellStick/Software/telldus-core/.

wget http://download.telldus.se/TellStick/Software/telldus-core/telldus-core-2.0.4.tar.gz
tar xvfz telldus-core-2.0.4.tar.gz
cd telldus-core


4. Build tdtool and rfcmd.

cmake -DBUILD_LIBTELLDUS-CORE=1 -DBUILD_TDTOOL=1 -DBUILD_RFCMD_WITH_LIBFTDI=0 -DGENERATE_MAN=1
make
make install


5. Edit the file /etc/ld.so.conf.d/local.conf (if not excisting, add the file):

nano /etc/ld.so.conf.d/local.conf

Add the following line:

/usr/local/lib 


6. Then run:

ldconfig
rm -f /var/state/telldus-core.conf


7. Insert the Tellstick into B3

8. To add receiver units, edit the file /etc/tellstick.conf

nano /etc/tellstick.conf

Adjust the config file to your receiver units. In this case: 1pcs NEXA NEYCR-1000 and 1pcs NEXA LWMR-210.

deviceNode = "/dev/tellstick"
device {
id = 1
name = "Office"
protocol = "arctech"
model = "codeswitch"
parameters {
house = "112233"
unit = "1"
}
}

device {
id = 2
name = "Outside"
protocol = "arctech"
model = "selflearning-dimmer"
parameters {
house = "445566"
unit = "1"
}
} 

Change the parameter "house" to a randomly choosen number. The uniqe numbers will make sure your units do not interfear with other units.

Install HomeAutomation


1. Installera AT för schemaläggning:

apt-get install at

2. Plocka bort www-data från filerna: /etc/cron.deny, /etc/at.deny, /etc/cron.allow and /etc/at.allow files (if they exist).

nano /etc/at.deny

3. Ladda ner senaste HomeAutomation-mjukvara till din PC. http://karpero.mine.nu/ha/index.php?page=download&hl=sv_SE

4. Packa upp i /home/web/HApå din B3

5. Editera konfigurationsfilen /home/web/HA/config_sample_linux.php. Sätt sökvägen i filen till: /home/web/HA .

6. Döp om konfigurationsfilen config_sample_linux.php till config.php

7. Sätt tidszon för Appache2. Editera filen php.ini.

nano /etc/php5/apache2/php.ini

Ändra date.timezone till följande:

”date.timezone = Europe/Stockholm”


8. Starta om B3 för att php-ändringarna ska ta

9. Installera myPhPAdmin på B3.

apt-get install phpMyAdmin

10. Lägg till en databas för HomeAutomation.

mysqladmin create <välj-databas-namn>

11. Logga in på http://b3/HA/ och följ instruktionerna.

12. För databasen: ange databasnamnet du skapat

12.1. Usr: root

12.2. Psw: ”” (dvs tomt)

Konfigurering av dina enheter i HomeAutomation

1. Logga in via UIt http://b3/HA/

2. Uppdatera enheter från tellstick under menyn ”Enheter”

3. Inlärning av Nexa-enheter från web-UIt :

3.1. Tryck på learn-knappen på NEXA

3.2. Slå på din enhet under menyn Enheter.

3.3. Se till att din enhet blir syncad med Tellsticken.. dvs blinkar.